dmesg - Intel 0000
Linux version 4.8.0-45-generic (buildd@lcy01-30) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #48~16.04.1-Ubuntu SMP Fri Mar 24 12:46:56 UTC 2017 (Ubuntu 4.8.0-45.48~16.04.1-generic 4.8.17)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x0000000078f1dfff] usable
BIOS-e820: [mem 0x0000000078f1e000-0x000000007972bfff] reserved
BIOS-e820: [mem 0x000000007972c000-0x000000007982afff] usable
BIOS-e820: [mem 0x000000007982b000-0x0000000079d4bfff] ACPI NVS
BIOS-e820: [mem 0x0000000079d4c000-0x000000007bc9afff] reserved
BIOS-e820: [mem 0x000000007bc9b000-0x000000007bcfcfff] type 20
BIOS-e820: [mem 0x000000007bcfd000-0x000000007bcfdfff] usable
BIOS-e820: [mem 0x000000007bcfe000-0x000000007bd83fff] reserved
BIOS-e820: [mem 0x000000007bd84000-0x000000007bffffff] usable
BIOS-e820: [mem 0x000000007c000000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000087fffffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.40 by American Megatrends
efi: ACPI=0x79887000 ACPI 2.0=0x79887000 ESRT=0x7ba62d18 SMBIOS=0xf05e0 SMBIOS 3.0=0x7ba5e000 MPS=0xfca40
esrt: Reserving ESRT space from 0x000000007ba62d18 to 0x000000007ba62d50.
SMBIOS 3.0.0 present.
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x880000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000080000000 mask 3FFF80000000 uncachable
1 base 380000000000 mask 3FE000000000 uncachable
2 base 0000F9800000 mask 3FFFFF800000 write-through
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0x7c000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcdf0-0x000fcdff] mapped at [ffff9372800fcdf0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff937280093000] 93000 size 24576
Using GB pages for direct mapping
BRK [0x147e3b000, 0x147e3bfff] PGTABLE
BRK [0x147e3c000, 0x147e3cfff] PGTABLE
BRK [0x147e3d000, 0x147e3dfff] PGTABLE
BRK [0x147e3e000, 0x147e3efff] PGTABLE
BRK [0x147e3f000, 0x147e3ffff] PGTABLE
BRK [0x147e40000, 0x147e40fff] PGTABLE
BRK [0x147e41000, 0x147e41fff] PGTABLE
BRK [0x147e42000, 0x147e42fff] PGTABLE
BRK [0x147e43000, 0x147e43fff] PGTABLE
RAMDISK: [mem 0x35fa6000-0x36fcafff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x0000000079887000 000024 (v02 SUPERM)
ACPI: XSDT 0x00000000798870A0 0000BC (v01 01072009 AMI 00010013)
ACPI: FACP 0x00000000798B7E08 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013)
ACPI: DSDT 0x00000000798871F0 030C18 (v02 SUPERM SMCI--MB 01072009 INTL 20091013)
ACPI: FACS 0x0000000079D4AF80 000040
ACPI: APIC 0x00000000798B7F18 0001E0 (v03 SUPERM SMCI--MB 01072009 AMI 00010013)
ACPI: FPDT 0x00000000798B80F8 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013)
ACPI: FIDT 0x00000000798B8140 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013)
ACPI: SPMI 0x00000000798B81E0 000040 (v05 SUPERM SMCI--MB 00000000 AMI. 00000000)
ACPI: MCFG 0x00000000798B8220 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097)
ACPI: UEFI 0x00000000798B8260 000042 (v01 SUPERM SMCI--MB 01072009 00000000)
ACPI: HPET 0x00000000798B82A8 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013)
ACPI: WDDT 0x00000000798B82E0 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013)
ACPI: SSDT 0x00000000798B8320 016F57 (v02 SUPERM PmMgt 00000001 INTL 20120913)
ACPI: NITR 0x00000000798CF278 000071 (v02 SUPERM SMCI--MB 00000001 INTL 20091013)
ACPI: SSDT 0x00000000798CF2F0 00264C (v02 SUPERM SpsNm 00000002 INTL 20120913)
ACPI: SSDT 0x00000000798D1940 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913)
ACPI: PRAD 0x00000000798D19A8 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913)
ACPI: DMAR 0x00000000798D1AB0 0000C4 (v01 SUPERM SMCI--MB 00000001 INTL 20091013)
ACPI: HEST 0x00000000798D1B78 00027C (v01 SUPERM SMCI--MB 00000001 INTL 00000001)
ACPI: BERT 0x00000000798D1DF8 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001)
ACPI: ERST 0x00000000798D1E28 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001)
ACPI: EINJ 0x00000000798D2058 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000087fffffff]
NODE_DATA(0) allocated [mem 0x87fffb000-0x87fffffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000087fffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x0000000078f1dfff]
node 0: [mem 0x000000007972c000-0x000000007982afff]
node 0: [mem 0x000000007bcfd000-0x000000007bcfdfff]
node 0: [mem 0x000000007bd84000-0x000000007bffffff]
node 0: [mem 0x0000000100000000-0x000000087fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000087fffffff]
On node 0 totalpages: 8360505
DMA zone: 64 pages used for memmap
DMA zone: 30 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 7691 pages used for memmap
DMA32 zone: 492186 pages, LIFO batch:31
Normal zone: 122880 pages used for memmap
Normal zone: 7864320 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x18] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x19] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1d] high edge lint[0x1])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 28 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x78f1e000-0x7972bfff]
PM: Registered nosave memory: [mem 0x7982b000-0x79d4bfff]
PM: Registered nosave memory: [mem 0x79d4c000-0x7bc9afff]
PM: Registered nosave memory: [mem 0x7bc9b000-0x7bcfcfff]
PM: Registered nosave memory: [mem 0x7bcfe000-0x7bd83fff]
PM: Registered nosave memory: [mem 0x7c000000-0x8fffffff]
PM: Registered nosave memory: [mem 0x90000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed44fff]
PM: Registered nosave memory: [mem 0xfed45000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x90000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:28 nr_node_ids:1
percpu: Embedded 36 pages/cpu @ffff937adee00000 s107864 r8192 d31400 u262144
pcpu-alloc: s107864 r8192 d31400 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 -- -- -- --
Built 1 zonelists in Node order, mobility grouping on. Total pages: 8229840
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 32742552K/33442020K available (8829K kernel code, 1441K rwdata, 3832K rodata, 1548K init, 1296K bss, 699468K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=28, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=28.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=28
NR_IRQS:33024 nr_irqs:1056 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2000.220 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.44 BogoMIPS (lpj=8000880)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160422
ACPI: 4 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 22 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 32K (ffffffff9beed000 - ffffffff9bef5000)
ftrace: allocating 33449 entries in 131 pages
smpboot: APIC(0) Converting physical 0 to logical package 0
smpboot: Max logical packages: 2
DMAR: Host address width 46
DMAR: DRHD base: 0x000000fbffc000 flags: 0x1
DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap 8d2078c106f0466 ecap f020de
DMAR: RMRR base: 0x0000007ba71000 end: 0x0000007ba7ffff
DMAR: ATSR flags: 0x0
DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0
DMAR-IR: IOAPIC id 1 under DRHD base 0xfbffc000 IOMMU 0
DMAR-IR: IOAPIC id 2 under DRHD base 0xfbffc000 IOMMU 0
DMAR-IR: HPET id 0 under DRHD base 0xfbffc000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
x2apic: IRQ remapping doesn't support X2APIC mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Genuine Intel(R) CPU 0000 @ 2.00GHz (family: 0x6, model: 0x4f, stepping: 0x0)
Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 #22 #23 #24 #25 #26 #27
x86: Booted up 1 node, 28 CPUs
smpboot: Total of 28 processors activated (112012.32 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x7982b000-0x79d4bfff] (5378048 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 23:16:24, date: 04/01/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: PRAD 0x0000000000000000 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913)
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Enabling Firmware First mode for corrected errors.
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:03: _OSC: platform does not support [AER]
acpi PNP0A03:03: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000
pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100
pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100
pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000
pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000
pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000
pci 0000:ff:0c.4: [8086:6fe4] type 00 class 0x088000
pci 0000:ff:0c.5: [8086:6fe5] type 00 class 0x088000
pci 0000:ff:0c.6: [8086:6fe6] type 00 class 0x088000
pci 0000:ff:0c.7: [8086:6fe7] type 00 class 0x088000
pci 0000:ff:0d.0: [8086:6fe8] type 00 class 0x088000
pci 0000:ff:0d.1: [8086:6fe9] type 00 class 0x088000
pci 0000:ff:0d.2: [8086:6fea] type 00 class 0x088000
pci 0000:ff:0d.3: [8086:6feb] type 00 class 0x088000
pci 0000:ff:0d.4: [8086:6fec] type 00 class 0x088000
pci 0000:ff:0d.5: [8086:6fed] type 00 class 0x088000
pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:6ff9] type 00 class 0x088000
pci 0000:ff:0f.2: [8086:6ffa] type 00 class 0x088000
pci 0000:ff:0f.3: [8086:6ffb] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000
pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000
pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100
pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000
pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100
pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000
pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000
pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100
pci 0000:ff:12.4: [8086:6f60] type 00 class 0x088000
pci 0000:ff:12.5: [8086:6f38] type 00 class 0x110100
pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000
pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000
pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000
pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000
pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000
pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000
pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000
pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000
pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000
pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000
pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000
pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000
pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000
pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000
pci 0000:ff:16.0: [8086:6f68] type 00 class 0x088000
pci 0000:ff:16.1: [8086:6f79] type 00 class 0x088000
pci 0000:ff:16.2: [8086:6f6a] type 00 class 0x088000
pci 0000:ff:16.3: [8086:6f6b] type 00 class 0x088000
pci 0000:ff:16.6: [8086:6f6e] type 00 class 0x088000
pci 0000:ff:16.7: [8086:6f6f] type 00 class 0x088000
pci 0000:ff:17.0: [8086:6fd0] type 00 class 0x088000
pci 0000:ff:17.1: [8086:6fd1] type 00 class 0x088000
pci 0000:ff:17.2: [8086:6fd2] type 00 class 0x088000
pci 0000:ff:17.3: [8086:6fd3] type 00 class 0x088000
pci 0000:ff:17.4: [8086:6fb8] type 00 class 0x088000
pci 0000:ff:17.5: [8086:6fb9] type 00 class 0x088000
pci 0000:ff:17.6: [8086:6fba] type 00 class 0x088000
pci 0000:ff:17.7: [8086:6fbb] type 00 class 0x088000
pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000
pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000
pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000
pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000
pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000
pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000
pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [AER]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x1000-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xfedb0000-0xfedb000f window]
pci_bus 0000:00: root bus resource [mem 0xfedc0000-0xfedc000f window]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000
pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400
pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
pci 0000:00:03.2: System wakeup disabled by ACPI
pci 0000:00:04.0: [8086:6f20] type 00 class 0x088000
pci 0000:00:04.0: reg 0x10: [mem 0xfb52c000-0xfb52ffff 64bit]
pci 0000:00:04.1: [8086:6f21] type 00 class 0x088000
pci 0000:00:04.1: reg 0x10: [mem 0xfb528000-0xfb52bfff 64bit]
pci 0000:00:04.2: [8086:6f22] type 00 class 0x088000
pci 0000:00:04.2: reg 0x10: [mem 0xfb524000-0xfb527fff 64bit]
pci 0000:00:04.3: [8086:6f23] type 00 class 0x088000
pci 0000:00:04.3: reg 0x10: [mem 0xfb520000-0xfb523fff 64bit]
pci 0000:00:04.4: [8086:6f24] type 00 class 0x088000
pci 0000:00:04.4: reg 0x10: [mem 0xfb51c000-0xfb51ffff 64bit]
pci 0000:00:04.5: [8086:6f25] type 00 class 0x088000
pci 0000:00:04.5: reg 0x10: [mem 0xfb518000-0xfb51bfff 64bit]
pci 0000:00:04.6: [8086:6f26] type 00 class 0x088000
pci 0000:00:04.6: reg 0x10: [mem 0xfb514000-0xfb517fff 64bit]
pci 0000:00:04.7: [8086:6f27] type 00 class 0x088000
pci 0000:00:04.7: reg 0x10: [mem 0xfb510000-0xfb513fff 64bit]
pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000
pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000
pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:6f2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xfb539000-0xfb539fff]
pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000
pci 0000:00:11.4: [8086:8d62] type 00 class 0x010601
pci 0000:00:11.4: reg 0x10: [io 0xf110-0xf117]
pci 0000:00:11.4: reg 0x14: [io 0xf100-0xf103]
pci 0000:00:11.4: reg 0x18: [io 0xf0f0-0xf0f7]
pci 0000:00:11.4: reg 0x1c: [io 0xf0e0-0xf0e3]
pci 0000:00:11.4: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:11.4: reg 0x24: [mem 0xfb538000-0xfb5387ff]
pci 0000:00:11.4: PME# supported from D3hot
pci 0000:00:14.0: [8086:8d31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xfb500000-0xfb50ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:8d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfb537000-0xfb53700f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.1: [8086:8d3b] type 00 class 0x078000
pci 0000:00:16.1: reg 0x10: [mem 0xfb536000-0xfb53600f 64bit]
pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfb534000-0xfb5343ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:8d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:8d14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfb533000-0xfb5333ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:8d44] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfb532000-0xfb5327ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfb531000-0xfb5310ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0580-0x059f]
pci 0000:01:00.0: [144d:a804] type 00 class 0x010802
pci 0000:01:00.0: reg 0x10: [mem 0xfb400000-0xfb403fff 64bit]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [mem 0xfb400000-0xfb4fffff]
pci 0000:02:00.0: [15b3:6750] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [mem 0xfb200000-0xfb2fffff 64bit]
pci 0000:02:00.0: reg 0x18: [mem 0xf9800000-0xf9ffffff 64bit pref]
pci 0000:02:00.0: reg 0x30: [mem 0xfb100000-0xfb1fffff pref]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0: bridge window [mem 0xfb100000-0xfb2fffff]
pci 0000:00:02.0: bridge window [mem 0xf9800000-0xf9ffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:04:00.0: [8086:1521] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [mem 0xfb320000-0xfb33ffff]
pci 0000:04:00.0: reg 0x18: [io 0xe020-0xe03f]
pci 0000:04:00.0: reg 0x1c: [mem 0xfb344000-0xfb347fff]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:04:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs)
pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:04:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs)
pci 0000:04:00.1: [8086:1521] type 00 class 0x020000
pci 0000:04:00.1: reg 0x10: [mem 0xfb300000-0xfb31ffff]
pci 0000:04:00.1: reg 0x18: [io 0xe000-0xe01f]
pci 0000:04:00.1: reg 0x1c: [mem 0xfb340000-0xfb343fff]
pci 0000:04:00.1: PME# supported from D0 D3hot D3cold
pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:04:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs)
pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:04:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs)
pci 0000:00:03.2: PCI bridge to [bus 04]
pci 0000:00:03.2: bridge window [io 0xe000-0xefff]
pci 0000:00:03.2: bridge window [mem 0xfb300000-0xfb3fffff]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:06:00.0: [1a03:1150] type 01 class 0x060400
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 06-07]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:07:00.0: [1a03:2000] type 00 class 0x030000
pci 0000:07:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:07:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff]
pci 0000:07:00.0: reg 0x18: [io 0xd000-0xd07f]
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:00.0: PCI bridge to [bus 07]
pci 0000:06:00.0: bridge window [io 0xd000-0xdfff]
pci 0000:06:00.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: Enabled 2 GPEs in block 00 to 3F
SCSI subsystem initialized
libata version 3.00 loaded.
vgaarb: setting as boot device: PCI:0000:07:00.0
vgaarb: device added: PCI:0000:07:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:07:00.0
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x78f1e000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7982b000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7bcfe000-0x7bffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:01: [io 0x0500-0x057f] has been reserved
system 00:01: [io 0x0400-0x047f] has been reserved
system 00:01: [io 0x0580-0x059f] has been reserved
system 00:01: [io 0x0600-0x061f] has been reserved
system 00:01: [io 0x0880-0x0883] has been reserved
system 00:01: [io 0x0800-0x081f] has been reserved
system 00:01: [mem 0xfed1c000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved
system 00:01: [mem 0xff000000-0xffffffff] has been reserved
system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved
system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved
system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0a00-0x0a0f] has been reserved
system 00:02: [io 0x0a10-0x0a1f] has been reserved
system 00:02: [io 0x0a20-0x0a2f] has been reserved
system 00:02: [io 0x0a30-0x0a3f] has been reserved
system 00:02: [io 0x0a40-0x0a4f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
pnp: PnP ACPI: found 5 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci_bus 0000:00: max bus depth: 2 pci_try_num: 3
pci 0000:00:03.2: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [mem 0xfb400000-0xfb4fffff]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0: bridge window [mem 0xfb100000-0xfb2fffff]
pci 0000:00:02.0: bridge window [mem 0xf9800000-0xf9ffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:04:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref]
pci 0000:04:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref]
pci 0000:04:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref]
pci 0000:04:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref]
pci 0000:00:03.2: PCI bridge to [bus 04]
pci 0000:00:03.2: bridge window [io 0xe000-0xefff]
pci 0000:00:03.2: bridge window [mem 0xfb300000-0xfb3fffff]
pci 0000:00:03.2: bridge window [mem 0x90000000-0x900fffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:06:00.0: PCI bridge to [bus 07]
pci 0000:06:00.0: bridge window [io 0xd000-0xdfff]
pci 0000:06:00.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:1c.2: PCI bridge to [bus 06-07]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x1000-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xfedb0000-0xfedb000f window]
pci_bus 0000:00: resource 8 [mem 0xfedc0000-0xfedc000f window]
pci_bus 0000:00: resource 9 [mem 0x90000000-0xfbffbfff window]
pci_bus 0000:01: resource 1 [mem 0xfb400000-0xfb4fffff]
pci_bus 0000:02: resource 1 [mem 0xfb100000-0xfb2fffff]
pci_bus 0000:02: resource 2 [mem 0xf9800000-0xf9ffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
pci_bus 0000:04: resource 1 [mem 0xfb300000-0xfb3fffff]
pci_bus 0000:04: resource 2 [mem 0x90000000-0x900fffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:06: resource 1 [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:07: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:07: resource 1 [mem 0xfa000000-0xfb0fffff]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
PCI: CLS mismatch (64 != 32), using 64 bytes
pci 0000:07:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
Unpacking initramfs...
Freeing initrd memory: 16532K (ffff9372b5fa6000 - ffff9372b6fcb000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x70c04000-0x74c04000] (64MB) mapped at [ffff9372f0c04000-ffff9372f4c03fff]
Intel CQM monitoring enabled
Intel MBM enabled
Scanning for low memory corruption every 60 seconds
futex hash table entries: 8192 (order: 7, 524288 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1491088584.844:1): initialized
Initialise system trusted keyrings
workingset: timestamp_bits=40 max_order=23 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.25)
Allocating IMA blacklist keyring.
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie001: service driver pcie_pme loaded
pcieport 0000:00:03.2: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pci 0000:04:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.2:pcie001: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded
pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.2:pcie001: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xfa000000, using 1920k, total 1920k
efifb: mode is 800x600x32, linelength=3200, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 100x37
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x2120
intel_idle: v0.4.1 model 0x4F
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: using zlib compression
pstore: Registered erst as persistent store backend
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb534000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.8.0-45-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb533000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.8.0-45-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.8.0-45-generic xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 15 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.8.0-45-generic xhci-hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=8087, idProduct=800a
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=8002
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
tsc: Refined TSC clocksource calibration: 1999.998 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39a8595ce59, max_idle_ns: 881590778713 ns
usb 3-14: new high-speed USB device number 2 using xhci_hcd
usb 3-14: New USB device found, idVendor=0557, idProduct=7000
usb 3-14: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-14:1.0: USB hub found
hub 3-14:1.0: 4 ports detected
i8042: No controller found
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: sig=0x406f0, pf=0x20, revision=0x14
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 9b69ed3519683b8c4968bdbd1cd75126a136f731'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 13:222:301
usb 3-14.1: new low-speed USB device number 3 using xhci_hcd
tty tty30: hash matches
acpi device:1fd: hash matches
acpi device:9b: hash matches
rtc_cmos 00:00: setting system clock to 2017-04-01 23:16:27 UTC (1491088587)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1548K (ffffffff9bd6a000 - ffffffff9beed000)
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1396K (ffff9373c74a3000 - ffff9373c7600000)
Freeing unused kernel memory: 264K (ffff9373c79be000 - ffff9373c7a00000)
x86/mm: Checked W+X mappings: passed, no W+X pages found.
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
usb 3-14.1: New USB device found, idVendor=0557, idProduct=2419
usb 3-14.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
nvme nvme0: pci function 0000:01:00.0
ahci 0000:00:11.4: version 3.0
ahci 0000:00:11.4: SSS flag set, parallel bus scan disabled
ahci 0000:00:11.4: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:11.4: flags: 64bit ncq stag pm led clo pio slum part ems apst
PTP clock support registered
usb 3-14.2: new high-speed USB device number 4 using xhci_hcd
mlx4_core: Mellanox ConnectX core driver v2.2-1 (Feb, 2014)
mlx4_core: Initializing 0000:02:00.0
[drm] Initialized drm 1.1.0 20060810
dca service started, version 1.12.1
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: SATA max UDMA/133 abar m2048@0xfb538000 port 0xfb538100 irq 35
ata2: SATA max UDMA/133 abar m2048@0xfb538000 port 0xfb538180 irq 35
ata3: SATA max UDMA/133 abar m2048@0xfb538000 port 0xfb538200 irq 35
ata4: SATA max UDMA/133 abar m2048@0xfb538000 port 0xfb538280 irq 35
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14.1/3-14.1:1.0/0003:0557:2419.0001/input/input1
[drm] AST 2400 detected
[drm] Analog VGA only
[drm] dram 1632000000 1 16 01000000
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
scsi host8: ahci
scsi host9: ahci
ata5: SATA max UDMA/133 abar m2048@0xfb532000 port 0xfb532100 irq 36
ata6: SATA max UDMA/133 abar m2048@0xfb532000 port 0xfb532180 irq 36
ata7: SATA max UDMA/133 abar m2048@0xfb532000 port 0xfb532200 irq 36
ata8: SATA max UDMA/133 abar m2048@0xfb532000 port 0xfb532280 irq 36
ata9: SATA max UDMA/133 abar m2048@0xfb532000 port 0xfb532300 irq 36
ata10: SATA max UDMA/133 abar m2048@0xfb532000 port 0xfb532380 irq 36
usb 3-14.2: New USB device found, idVendor=0ea0, idProduct=1111
usb 3-14.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
clocksource: Switched to clocksource tsc
usb-storage 3-14.2:1.0: USB Mass Storage device detected
[TTM] Zone kernel: Available graphics memory: 16415888 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
scsi host10: usb-storage 3-14.2:1.0
usbcore: registered new interface driver usb-storage
hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-14.1/input0
input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14.1/3-14.1:1.1/0003:0557:2419.0002/input/input2
hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-14.1/input1
igb 0000:04:00.0: added PHC on eth0
igb 0000:04:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:04:00.0: eth0: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:da:62:9e
igb 0000:04:00.0: eth0: PBA No: 010A00-000
igb 0000:04:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
nvme0n1: p1 p2 p3 p4
igb 0000:04:00.1: added PHC on eth1
igb 0000:04:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:04:00.1: eth1: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:da:62:9f
igb 0000:04:00.1: eth1: PBA No: 010A00-000
igb 0000:04:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
usbcore: registered new interface driver uas
igb 0000:04:00.0 eno1: renamed from eth0
checking generic (fa000000 1e0000) vs hw (fa000000 1000000)
fb: switching to astdrmfb from EFI VGA
Console: switching to colour dummy device 80x25
fbcon: astdrmfb (fb0) is primary device
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-10: ST10000VN0004-1ZD101, SC60, max UDMA/133
ata1.00: 19532873728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST10000VN0004-1Z SC60 PQ: 0 ANSI: 5
Console: switching to colour frame buffer device 240x75
igb 0000:04:00.1 eno2: renamed from eth1
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata7.00: supports DRM functions and may not be fully accessible
ata6.00: supports DRM functions and may not be fully accessible
ata5.00: ATA-9: SanDisk SDSSDHII960G, X35510RL, max UDMA/133
ata5.00: 1875385008 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata7.00: disabling queued TRIM support
ata7.00: ATA-9: Samsung SSD 850 EVO 2TB, EMT02B6Q, max UDMA/133
ata7.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata6.00: disabling queued TRIM support
ata6.00: ATA-9: Samsung SSD 850 EVO 2TB, EMT02B6Q, max UDMA/133
ata6.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata8.00: supports DRM functions and may not be fully accessible
ata6.00: supports DRM functions and may not be fully accessible
ata7.00: supports DRM functions and may not be fully accessible
ata8.00: disabling queued TRIM support
ata8.00: ATA-9: Samsung SSD 850 EVO 2TB, EMT02B6Q, max UDMA/133
ata8.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata7.00: disabling queued TRIM support
ata6.00: disabling queued TRIM support
ata5.00: configured for UDMA/133
ata7.00: configured for UDMA/133
ata8.00: supports DRM functions and may not be fully accessible
ata6.00: configured for UDMA/133
ata8.00: disabling queued TRIM support
ata8.00: configured for UDMA/133
ast 0000:07:00.0: fb0: astdrmfb frame buffer device
[drm] Initialized ast 0.1.0 20120228 for 0000:07:00.0 on minor 0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 19532873728 512-byte logical blocks: (10.0 TB/9.10 TiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
random: fast init done
md: bind
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-10: ST10000VN0004-1ZD101, SC60, max UDMA/133
ata2.00: 19532873728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA ST10000VN0004-1Z SC60 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 19532873728 512-byte logical blocks: (10.0 TB/9.10 TiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
md: bind
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3.00: ATA-10: ST10000VN0004-1ZD101, SC60, max UDMA/133
ata3.00: 19532873728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
scsi: waiting for bus probes to complete ...
scsi 10:0:0:0: CD-ROM ATEN Virtual CDROM YS0J PQ: 0 ANSI: 0 CCS
sr 10:0:0:0: [sr0] scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 10:0:0:0: Attached scsi CD-ROM sr0
sr 10:0:0:0: Attached scsi generic sg2 type 5
scsi 2:0:0:0: Direct-Access ATA ST10000VN0004-1Z SC60 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdc] 19532873728 512-byte logical blocks: (10.0 TB/9.10 TiB)
sd 2:0:0:0: [sdc] 4096-byte physical blocks
sd 2:0:0:0: Attached scsi generic sg3 type 0
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 2:0:0:0: [sdc] Attached SCSI disk
md: bind
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4.00: ATA-10: ST10000VN0004-1ZD101, SC60, max UDMA/133
ata4.00: 19532873728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA ST10000VN0004-1Z SC60 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdd] 19532873728 512-byte logical blocks: (10.0 TB/9.10 TiB)
sd 3:0:0:0: Attached scsi generic sg4 type 0
scsi 4:0:0:0: Direct-Access ATA SanDisk SDSSDHII 10RL PQ: 0 ANSI: 5
sd 3:0:0:0: [sdd] 4096-byte physical blocks
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd1
sd 3:0:0:0: [sdd] Attached SCSI disk
md: bind
md: raid10 personality registered for level 10
md/raid10:md127: active with 4 out of 4 devices
md127: detected capacity change from 0 to 20001391116288
sd 4:0:0:0: [sde] 1875385008 512-byte logical blocks: (960 GB/894 GiB)
sd 4:0:0:0: Attached scsi generic sg5 type 0
scsi 5:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sde: sde1 sde2 sde3 sde4 sde5 sde6
sd 4:0:0:0: [sde] Attached SCSI disk
sd 5:0:0:0: [sdf] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 5:0:0:0: Attached scsi generic sg6 type 0
scsi 6:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
sd 5:0:0:0: [sdf] Write Protect is off
sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdf: sdf1
sd 5:0:0:0: [sdf] Attached SCSI disk
pmd_set_huge: Cannot satisfy [mem 0xf9c00000-0xf9e00000] with a huge-page mapping due to MTRR override.
mlx4_core 0000:02:00.0: PCIe link speed is 5.0GT/s, device supports 5.0GT/s
mlx4_core 0000:02:00.0: PCIe link width is x8, device supports x8
mlx4_en: Mellanox ConnectX HCA Ethernet driver v2.2-1 (Feb 2014)
mlx4_en 0000:02:00.0: Activating port:1
mlx4_en: 0000:02:00.0: Port 1: enabling only PFC DCB ops
sd 6:0:0:0: [sdg] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 6:0:0:0: Attached scsi generic sg7 type 0
scsi 7:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
mlx4_en: 0000:02:00.0: Port 1: Using 224 TX rings
mlx4_en: 0000:02:00.0: Port 1: Using 8 RX rings
mlx4_en: 0000:02:00.0: Port 1: frag:0 - size:1522 prefix:0 stride:1536
mlx4_en: 0000:02:00.0: Port 1: Initializing port
mlx4_en 0000:02:00.0: Activating port:2
mlx4_en: 0000:02:00.0: Port 2: enabling only PFC DCB ops
sd 6:0:0:0: [sdg] Write Protect is off
sd 6:0:0:0: [sdg] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
mlx4_en: 0000:02:00.0: Port 2: Using 224 TX rings
mlx4_en: 0000:02:00.0: Port 2: Using 8 RX rings
mlx4_en: 0000:02:00.0: Port 2: frag:0 - size:1522 prefix:0 stride:1536
mlx4_en: 0000:02:00.0: Port 2: Initializing port
sdg: sdg1
sd 6:0:0:0: [sdg] Attached SCSI disk
mlx4_core 0000:02:00.0 ens6: renamed from eth0
sd 7:0:0:0: [sdh] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 7:0:0:0: Attached scsi generic sg8 type 0
mlx4_core 0000:02:00.0 ens6d1: renamed from eth1
sd 7:0:0:0: [sdh] Write Protect is off
sd 7:0:0:0: [sdh] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdh: sdh1
sd 7:0:0:0: [sdh] Attached SCSI disk
md: bind
md: bind
md: bind
md: raid0 personality registered for level 0
md/raid0:md126: md_size is 11720282112 sectors.
md: RAID0 configuration for md126 - 1 zone
md: zone0=[sdf1/sdg1/sdh1]
zone-offset= 0KB, device-offset= 0KB, size=5860141056KB
md126: detected capacity change from 0 to 6000784441344
md: linear personality registered for level -1
md: multipath personality registered for level -4
md: raid1 personality registered for level 1
raid6: sse2x1 gen() 9077 MB/s
raid6: sse2x1 xor() 7306 MB/s
raid6: sse2x2 gen() 12115 MB/s
raid6: sse2x2 xor() 6053 MB/s
raid6: sse2x4 gen() 13375 MB/s
raid6: sse2x4 xor() 9512 MB/s
raid6: avx2x1 gen() 10761 MB/s
raid6: avx2x2 gen() 21179 MB/s
raid6: avx2x4 gen() 25544 MB/s
raid6: using algorithm avx2x4 gen() 25544 MB/s
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function: avx
async_tx: api initialized (async)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
Btrfs loaded, crc32c=crc32c-intel
random: crng init done
EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Created slice System Slice.
systemd[1]: Reached target Remote File Systems (Pre).
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
iscsi: registered transport (iser)
EXT4-fs (nvme0n1p2): re-mounted. Opts: errors=remount-ro
systemd-journald[698]: Received request to flush runtime journal from PID 1
ipmi message handler version 39.2
ipmi_si IPI0001:00: ipmi_si: probing via ACPI
ipmi_si IPI0001:00: [io 0x0ca2] regsize 1 spacing 1 irq 0
ipmi_si: Adding ACPI-specified kcs state machine
IPMI System Interface driver.
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
ipmi_si: probing via SPMI
ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SPMI-specified kcs state machine duplicate interface
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si IPI0001:00: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed.
ipmi_si IPI0001:00: Found new BMC (man_id: 0x002a7c, prod_id: 0x0924, dev_id: 0x20)
ipmi_si IPI0001:00: IPMI kcs interface initialized
IPMI SSIF Interface driver
Adding 19468284k swap on /dev/nvme0n1p4. Priority:-1 extents:1 across:19468284k SSFS
EXT4-fs (md126): mounted filesystem with ordered data mode. Opts: data=ordered
EXT4-fs (nvme0n1p3): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (md127): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1400 audit(1491088594.935:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=1710 comm="apparmor_parser"
audit: type=1400 audit(1491088594.935:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=1707 comm="apparmor_parser"
audit: type=1400 audit(1491088594.935:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lxd/lxd-bridge-proxy" pid=1712 comm="apparmor_parser"
audit: type=1400 audit(1491088594.935:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/libvirtd" pid=1714 comm="apparmor_parser"
audit: type=1400 audit(1491088594.935:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=1713 comm="apparmor_parser"
audit: type=1400 audit(1491088594.935:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1713 comm="apparmor_parser"
audit: type=1400 audit(1491088594.935:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/libvirt/virt-aa-helper" pid=1711 comm="apparmor_parser"
audit: type=1400 audit(1491088594.935:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=1716 comm="apparmor_parser"
audit: type=1400 audit(1491088594.939:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=1709 comm="apparmor_parser"
audit: type=1400 audit(1491088594.939:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1709 comm="apparmor_parser"
mlx4_en: ens6: frag:0 - size:1536 prefix:0 stride:1536
mlx4_en: ens6: frag:1 - size:4096 prefix:1536 stride:4096
mlx4_en: ens6: frag:2 - size:3390 prefix:5632 stride:3392
IPv6: ADDRCONF(NETDEV_UP): ens6: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
cgroup: new mount options do not match the existing superblock, will be ignored
igb 0000:04:00.0 eno1: igb: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
FS-Cache: Loaded
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.spnego registered
Key type cifs.idmap registered
ip_tables: (C) 2000-2006 Netfilter Core Team
audit_printk_skb: 18 callbacks suppressed
audit: type=1400 audit(1491088606.308:18): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="docker-default" pid=2587 comm="apparmor_parser"
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Bridge firewalling registered
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
Initializing XFRM netlink socket
IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
usb 3-14.2: reset high-speed USB device number 4 using xhci_hcd
usb 3-14.2: reset high-speed USB device number 4 using xhci_hcd
usb 3-14.2: USB disconnect, device number 4
CIFS VFS: Server nuc has not responded in 120 seconds. Reconnecting...
perf: interrupt took too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
systemd[1]: snapd.refresh.timer: Adding 2h 49min 53.121593s random time.
systemd[1]: snapd.refresh.timer: Adding 1h 24min 49.899934s random time.
systemd[1]: snapd.refresh.timer: Adding 3h 51min 33.973047s random time.
systemd[1]: snapd.refresh.timer: Adding 5h 51min 3.470156s random time.